2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 280Get this manual
3B-5 Differential: 6) Remove the front drive (differential) mounting bolts Connect the transfer cable Apply thread lock to the front drive (differential) mounting bolts and tighten the nuts to the specified torque: Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tightening torque Front drive (differential) gear case mounting nut (a): 45 Nm (4.5 kgf-m, 32.5 lb-ft) I827H1320005-01
7) Remove the transfer cable bracket bolts and disconnect the transfer cable (2)
I827H1320008-01
Pour the front differential gear oilRefer to "Front Differential Gear Oil Inspection (LT-A400F, LT-F400F) in Section 0B (Page 0B-9)"I827H1320006-01
8) Remove the front drive (differential) assembly from the frameInstallation Install the front drive (differential) assembly in the reverse order of removalPay attention to the following points: Apply grease to splines and fit the boot firmly: Grease 9900025160 (Water resistance grease) NOTE When engaging the yokes, align each wide spline tooth "A" of them