2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 258Get this manual
2D-4 Wheels and Tires: 4) Separate the tire from the rim using set of tire levers and rim protectors 3) Mount the tire on the rim by hand as shown in the figure
CAUTION
When using the tire levers, do not scratch or hit the sealing portion (hump) of the wheel or it may cause air-leakage
I831G1240009-02
4) When installing each tire, make sure the arrow "A" on the tire points in the direction of rotationAlso, make sure the outer side of the wheel rim is facing outward"A"
I831G1240006-01
5) After removing the tire, inspect the wheel if necessaryInstallation 1) Clean up the sealing portion of the rimI831G1240010-01
5) Inflate the tire to seat the tire beadMaximum tire bead seat pressure Front: 250 kPa (2.5 kgfcm2, 36psi) Rear: 250 kPa (2.5 kgfcm2, 36 psi)