2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 223Get this manual
Charging System: When installing the transfer gearshift arm, align the wide spline teeth of the arm and shaft 1J-9
Tighten the starter cup nut to the specified torque with proper barTightening torque Starter cup nut (f): 38 Nm (3.8 kgf-m, 27.5 lb-ft)
I827H11A0025-01
Install the gearshift link arm in the following angle(LTF400F)
I827H11A0028-02
Apply small quantity of thread lock to the recoil starter mounting bolts and tighten to the specified torque: Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent) Tightening torque Recoil starter mounting bolt (g): 10 Nm (1.0 kgfm, 7.0 lb-ft)