2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 201Get this manual
Starting System: Tighten the starter motor mounting bolts (1) with the engine ground lead wire (2) and starter motor lead wire mounting nut (3) to the specified torqueRefer to "Wiring Harness Routing Diagram in Section 9A (Page 9A-8)"Tightening torque Starter motor mounting bolt (a): 10 Nm (1.0 kgfm, 7.0 lb-ft) Starter motor lead wire mounting nut (b): Nm0.7 kgf-m, 5.0 lb-ft)
Apply small quantity of moly paste to the armature shaft: Moly paste 9900025140 (SUZUKI Moly paste or equivalent)
I827H1190008-01
Align the match mark on the starter motor case with the match mark on the housing end Tighten the starter motor housing bolts1
I827H1190005-01
Tightening torque Starter motor housing bolt (a): 3.5 Nm (0.35 kgfm, 2.5 lb-ft)