2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 10Get this manual
00-3 Precautions: Check the male connector for bend and female connector for excessive openingAlso check the coupler for locking (looseness), corrosion, dust, etcSwitch Never apply grease material to switch contact points to prevent damageCDI unitVarious sensors Since each component is high-precision part, great care should be taken not to apply any severe impacts during removal and installation"A" 4 I649G1000030-02
3Coupler
"A": Where male terminal fits
Clamp Clamp the wire harness at such positions as indicated in "Wiring Harness Routing Diagram in Section 9A (Page 9A-8)" Bend the clamp properly so that the wire harness is clamped securely In clamping the wire harness, use care not to allow it to hang down Do not use wire or any other substitute for the band type clamp