2007-2009 Suzuki LTZ90 factory service manual, Page 108Get this manual
CRANKSHAFT SHIM SELECTION Degrease the right crankshaft web, shim and inner race of the right crankshaft bearing Place the removed shim on the right crankshaft Put the plasti-gauge (special tool) cut out about 10 mm on the shim as shown09900-22302: Plasti-gauge
Install the right crankcase and tighten the crankcase boltsCrankcase bolt: 10 Nm (1.0 kgf-m, 7.0 lb-ft)
Remove the crankcase bolts Separate the crankcase into parts, left and right, with the special tool( 3-17)
09920-13120: Crankcase separator