2006-2009 Suzuki LT-R450 Service Manual, Page 337Get this manual
CHASSIS
Apply grease on the recessed portion of the joint plate holder and set the joint plate
NOTE: When positioning the joint plate on the tool, its stamp mark must face the joint plate holder side Set the drive chain on the tool as illustrated and turn in the adjuster bolt to secure the wedge holderwedge pin Turn in the pressure bolt "Au and align two joint pins properly with the respective holes of the joint plate Turn in the pressure bolt "Au further using the bar (J) to press the joint plate over the joint pins
Continue pressing the joint plate until the distance between the two joint plates come to the specification