2004-2009 Suzuki LT-Z250 Service Manual, Page 211Get this manual
CHASSIS
REAR SHOCK ABSORBER SPACER AND BEARING Remove the spacers and dust seals$ The removed dust seals must be replaced with new onesInspect the spacers for any flaws or other damageIf any damages are found, replace the spacers with new onesInsert the spacer into the rear shock absorber bearing and then check the play by moving the spacer up and downIf excessive play is noted, replace the bearing with new one
Remove the rear shock absorber bearing with the special tools 09923-73210: Bearing remover 09930-30104: Sliding shaftThe removed bearing must be replaced with new one