2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 242Get this manual
ELECTRICAL SYSTEM
Repeat the above procedure few times and measure the highest pickup coil peak voltageTester knob indication: Voltage) Pickup coil peak voltage: More than 4.0 If the peak voltage measured on the CDI unit coupler is lower than the standard value, measure the peak voltage on the generator coupler as follows Remove the fuel tank left side cover( 7-5) Disconnect the generator coupler and connect the multi circuit tester with the peak volt adaptor as followsPickup coil:Probe.GreenWhite lead wireProbe.BlackYellow lead wire
Measure the pickup coil peak voltage in the same manner as on the CDI unit couplerTester knob indication: Voltage)