2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 202Get this manual
CHASSIS
HANDLEBARS When installing the lower handlebar holder to the steering shaft, the higher mating portion must face to forward Set the handlebars to match its punched mark to the mating face of the handlebar clamps First tighten the bolts to the specified torque and then tighten the bolts to the specified torqueHandlebar clamp bolt: 23 Nm (2.3 kgf-m, 16.5 lb-ft) Install the steering head cover with the projection inserting into the cushion on the steering head cover bracketNOTE: The indicator light position on the steering head cover is shown on page 8-24Forward