2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 80Get this manual
REASSEMBLY Assemble the transfer in the reverse order of disassemblyPay attention to the following points: NOTE:Always use new snap rings Before installing the gears, coat lightly engine oil to the shafts and gears
Never reuse snap ringAfter snap ring has been removed from shaft, it should be discarded and new snap ring must be installed When installing new snap ring, care must be taken not to expand the end gap larger than required to slip the snap ring over the shaft After installing snap ring, always ensure that it is completely seated in its groove and securely fitted