2002-2007 Suzuki 500 LTA Service Manual, Page 162Get this manual
DRIVE TRAIN
LEFT SIDE SHIM SELECTION Install the removed right side shim(s) and differential assembly Put few pieces of solder (O.D 1.2 1.5 mm L: mm) on the bearing outer race, as shown
NOTE:Do not install the left side shim(s) at this time Apply small quantity of grease to the solders to prevent them from falling Assemble the gear case cover and tighten its bolts to the specified torque in crisscross pattern( 4-14)
NOTE:Do not apply sealant to the mating surface of the gear case Do not apply thread lock to the case cover bolts( 4-14)