1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 324Get this manual
LTF300V300FV (2000MODEL) 918 FLOAT HEIGHT ADJUSTMENT To check the float height, turn the carburetor upside downMeasure the float height while the float arm is just contacting the needle valve using vernier calipersBend the tongue as necessary to bring the float height to the specified level ,.fooh 09900-20101: Vernier
Float height
calipers
: 13.0 0.5 mm (0.51
REASSEMBLY
Reassemble the carburetor in the reverse order of disassemblyPay attention to the following points If the throttle valve is removed for cleaningWhen reinstalling the throttle valve, apply THREAD LOCK "1342" to its mounting screws and tighten them NOTE:
Face the stamped side of the throttle valve out
PILOT SCREW After cleaningreinstall the pilot screw CD to the original setting by turning the screw in until it lightly seats, and then backing it out the same number of turns counted during disassemblyCD Pilot screw Carburetor body