1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 227Get this manual
CHASSIS
Align the range lever cable eye rod hole and pin holes with
the notch in the center (low position) of the shift lever case bracketFasten the range lever cable and shift lever, by putting pin through the pin holes and an E-ring to the pinNOTE: Direction of the eye rod is determined by the side, differential case side or crankcase side, it is installed onI CAUTION I
Be sure to install the range lever eye rod accurately and that the end face of the selection lever contacts the flange face of the bushing CD of the range lever cableNOTE: In handling the push-pull cable, use care not to bend itShown in the illustration is strictly prohibited exampleI CAUTION I