1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 175Get this manual
CHASSIS
Inflate the tire to seat the tire beadMAXIMUM TIRE BEAD SEAT PRESSURE Front Rear 250 kPa (2.5 kgcm36 psi) 250 kPa (2 .5 kgcm36 psi)
I CAUTION I
Place the tire under protective tire cage or similar protective covering before inflating the tireTo minimize the possibility of tire damage when seating the tire bead, never exceed the MAXIMUM TIRE BEAD SEAT PRESSURE rating shown on the tireNOTE: Check the "rim line" cast on the tire side wallsIt must be equally spaced from the wheel rim all the way aroundIf the distance between the rim line and the wheel rim varies this indicates that the bead is not properly seatedIf this is so, deflate the tire completely, and unseat the tire bead on both sidesThen, coat the bead with clean water, and re-seat the tire As soon as the bead is seateddeflate the tire and reinflate it to the proper operating pressure COLD INFLATION TIRE PRESSURE FRONT REAR kPa 30 27.5