1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 137Get this manual
SHAFT DRIVE AND DIFFERENTIAL (LTF300F)
Measure the clearance between the case and hub using the
special tool at any point
.fOOl09900-20803: Thickness gauge
Standard Case to hub clearance: 0.4-0.6 mm (0.016-0.024 in)
If it is not within the specificationthe shims must be changed
NOTE: When changing the shims, measure the thickness of the old shims as guide, adjust the clearance by referring to the chart below
List of shims (front differential left side gear shims) (See p.4-30 Part No09160-29011 09160-29012 09160-29013