1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 124Get this manual
SHAFT DRIVE AND DIFFERENTIAL (LTF300F)
FINAL ASSEMBLY AND REMOUNTING
After adjusting both gear backlash and tooth contact correctly, remove the secondary driven output shaft and subtransmission output shaft Clean off any machinist's dye or paste from the gear teeth, and lubricate the teeth with engine oil Apply THREAD LOCK SUPER "1303" or "1322" to the front drive output yoke nut and sub-transmission output shaft nut, and then tighten the front drive output yoke nut and subtransmission output shaft nut to the specified torqueFor USA 99000-32030: THREAD LOCK SUPER1303" For the other countries 99000-32110: THREAD LOCK SUPER1322"