1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 82Get this manual
Install the starter clutch in the proper direction as shown NOTE: When installing the starter clutch onto the rotor, make sure the notch in the bearing faces to the rotor
Apply engine oil to the starter clutch
Apply THREAD LOCK SUPER "1303" to the hexagon bolts, and then tighten them to the specified torque while holding the rotor and using 29 mm off-set wrench 99000-32030: THREAD LOCK SUPER1303" Starter clutch bolt: 26 Nm (2.6 kg-m, 19.0 Ib-ft)
Install the starter gear CD to the starter clutch Check that the rotoT turns in the direction of the arrow on the rotor while holding the starter gear CD, and that the rotor never turns in the opposite direction of the arrow