1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 79Get this manual
CRANKSHAFT
CRANKSHAFT RUNOUT
Support the crankshaft with "V" blocksMeasure the runout with dial gaugeReplace the camshaft if the runout exceeds the limit
'MOl09900-20606: Dial gauge (1100 mm, 10 mm)
09900-20701: Magnetic stand 09910-21304: V-block set (100 mm) Service Limit Camshaft runout (INEX): 0.08 mm (0.003 in)
CLUTCH DRIVE PLATES NOTE: Wipe off any engine oil from the clutch drive plates using clean rag
Measure the thickness of the clutch drive plates using vernier calipersIf clutch drive plate is not within the standard range, replace the clutch plates as set