1985-1990 Suzuki LT50 Service Manual, Page 70Get this manual
CHASSIS
TOE-IN ADJUSTMENT
The procedure for adjusting the toe -in is as follows Place the vehicle on level ground and set the handle bars straightMake sure tha the ll tires re inflated to the fol lowing pressure0 .250.35 kg em(3 .5.0 psi)
STD Pressure
Loosen the loc nuts
on each of the tie-rodsI
NOTE: ock nuts of yellow su rface finishing is left-
hand thread Measure the distances and of front wheels (in illustration) and adjust the tie-rods, ri ght and left, to within the specified range- B= (2 .55.5 mm)
Toe-in .5.5 mm (0.100.22 in )