1985-1990 Suzuki LT50 Service Manual, Page 36Get this manual
SE RVICING ENGINE
PISTON PIN .OUsing micrometer, measure the piston pin ou -
side diameter at three positions
0990020205
Service Limit
Micrometer (025 mm)
11.980 mm
(004717 in)
PISTON RINGS
Check each ring for end gap, reading the gap with thickness gauge shown in FigIf the end gap is found to exceed the lim it, indicated below, rep lace it with new oneThe end gap of each ring is to be measured with the ring fitted squarely into the cylinder bore and held at the least worn part near the cylinder baltom, as shown in Fig
0990020803
Service Limit