2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 241Get this manual
CLUTCHING 2Apply Loctite 609 evenly to bushing bore inside moveable sheave3Set bushing in place on sheave4Insert installation puller tool (Item AB) with "A" side down, into center of bushingNOTE: 700 EFI ClutchUse Bushing Tool PA473365With towers pointing upward, slide sheave, bushing and tool onto puller rod6Install nut on puller rod and hand tightenTurn barrel to apply additional tension if needed7Turn sheave counterclockwise, making sure bushing is drawn straight into boreContinue until bushing is seated8Remove nut from puller rod and set aside9Remove sheave from puller10Remove installation toolCover Bushing Removal 1Install main adapter (Item 8) on pullerRemoval Tool (3) Nut (C) 7Remove nut from puller rod and set aside8Remove bushing and bushing removal tool from pullerDiscard bushingCover Bushing Installation 1Apply Loctite 609 evenly to bushing bore in cover2Working from inside of cover, insert new bushing and bushing installation tool into center of clutch cover3With main adapter on puller, insert cover onto puller rod, placing outside of cover toward vise4Install nut on rod and hand tightenTurn puller barrel to apply more tension if needed5Turn clutch cover counterclockwise on puller rod until bushing is seated6Remove nut from puller rodTake installation tool and clutch cover off rod