2011 Polaris Ranger RZR ATV Service Manual, Page 353Get this manual
ELECTRICAL AWD2WDTURF Switch (INT'L)
1Disconnect the AWD2WDTURF switch harness by depressing the connector locks and pulling on the connectorDo not pull on the wiringTest between the sets of outputs (AWD2WDTURF)If any of the tests fail, replace the switch assembly Move the switch to AWDThere should be continuity between switch pins and 3; and Move the switch to 2WDThere should be no continuity between any pins Move the switch to TURFThere should be continuity between switch pins and 2; and 5Orientation Tab
Turn Signal Switch (INT'L)
1Disconnect the Turn Signal switch harness by depressing the connector locks and pulling on the connectorDo not pull on the wiringTest between the sets of outputs (HI BEAMLO BEAML-TURNR-TURNHORN)If any of the tests fail, replace the switch assembly2