2011 Polaris Ranger RZR ATV Service Manual, Page 352Get this manual
ELECTRICAL Ignition Key Switch (INT'L)
1Disconnect the key switch harness by lifting the connector lock and pulling on the connectorDo not pull on the wiringTest between the sets of outputs (OFFON LIGHTSONSTART)If any of the tests fail, replace ignition switch assembly Turn the ignition key to ON LIGHTSThere should be continuity between switch pins A, and F; and Turn the ignition key to ONThere should be continuity between pins and D; and Turn the ignition key to STARTThere should be continuity between pins and B; and D; and F