2011 Polaris Ranger RZR ATV Service Manual, Page 351Get this manual
ELECTRICAL Headlamp Switch
1Disconnect the headlamp switch harness by depressing the connector locks and pulling on the connectorDo not pull on the wiringTest between the sets of outputs (OFFLOWHIGH)If any of the tests fail, replace headlamp switch assembly Move the switch to HIGHThere should be continuity between switch pins and 3; and Move the switch to LOWThere should be continuity between switch pins and 3; and Move the switch to OFFThere should be continuity between switch pins and 2; and 5
Ignition Key Switch