2011 Polaris Ranger RZR ATV Service Manual, Page 319Get this manual
TRANSMISSION 10Install the shift collar onto the clutch shaftPull back fully on gear selector arm to bring the shift yoke arms up and engage the shift shoes onto the center groove of the shift collarShifting the clutch shaft position may aid in shift collar installationInstall the parkreverse spacer on top of the shift collar as shown12With the transmission in neutral, lubricate and install the thrust washer, drum gear, plate, springs, contact pins and the gear position sensorO-ring assemblyVerify the contact pins are aligned as shown with the transmission in neutralTorque the retaining screws to specification
11Install the dent sleeve assembly, ball, spring and outer detent screwUse new O-rings anytime these screws are removedTorque the detent sleeve assembly to specificationTURN THE OUTER DETENT SCREW ONLY UNTIL LIGHT SHIFTING RESISTANCE IS FELT AT THIS TIMEPLACE THE TRANSMISSION IN NEUTRAL=Apply Lubricant to shift drum components