2011 Polaris Ranger RZR ATV Service Manual, Page 317Get this manual
TRANSMISSION 26Remove the screw from the end of the shift cable lever and remove the shifter assembly from the housing
Transmission Shift Housing Reassembly
12Install new shift cable lever seal and press it flush with the caseApply lubricant to the seal lipLubricate the shaft of the shifter assembly and install the assembly into the housing with new retaining ring and washerInstall the shift cable lever ("X" facing out) and torque the retaining screw to specification
27Inspect the shifter assembly shaft and housing for excessive wear or damageReplace components if needed28Inspect and replace the case bearings if requiredNOTE: Do not pull bearings from case for inspection, as the removal process damages the bearing