2011 Polaris Ranger RZR ATV Service Manual, Page 315Get this manual
TRANSMISSION 10Remove the spacer, contact pins, springs, drum gear and washer from the shift housingReplace any worn or damaged components13Pull back fully on gear selector arm to bring shift collar up and disengage the shift collar from the clutch yokeLifting on the clutch shaft may aid in shift collar removal
11Remove the inner shift detent screws, springs, and balls from the shift housing
14Inspect the inner and outer gear teeth and splines on both ends of the shift collar for excessive wear or damage15Remove the retaining rings from each end of the shift collar16Remove the wave spring and ball bearing cage assembly from the shift collar as shownNOTE: Never remove the outer shift detent screw firstRemoval of the outer screw will allow the detent ball and spring to fall into the shift housing12Remove the parkreverse spacer from the clutch shaft