2011 Polaris Ranger RZR ATV Service Manual, Page 308Get this manual
TRANSMISSION TRANSMISSION SERVICE
Transmission RemovalService Notes
The engine, transmission and rear differential are bolted together as unitRemoval of the transmission is not possible without removing the engine and differentialThe shift housing cannot be removed without first disassembling the transfer caseNOTE: Refer to the "Engine Removal" section in Chapter to remove the engine and drivetrain3Remove the (7) fasteners retaining the transmission to rear gearcase mount bracketNote the number or thickness of shims for reassembly purposes
Transfer Case Disassembly
IMPORTANT: Shift housing repairs are not possible without performing transfer case disassemblyRead and understand all instructions before beginning disassemblyNOTE: Exploded views are located at the end of this chapter for additional information12Place the transmission in the neutral position5Drain both the transfer case and transmission case halves67Inspect the driveshaft splines for wear and the O-rings for damageReplace if found to be worn or damagedRemove the LH front isolator mount bracketRefer to Chapter 3Remove the screws from the transfer case cover and remove the cover (note position of the longest screw #4)4Remove the connector tube bolts securing the rear gear case and transmission transfer case