2011 Polaris Ranger RZR ATV Service Manual, Page 278Get this manual
FINAL DRIVE 6Remove the bolt that attaches the rear bearing carrier to the upper A-arm
Outer CV JointBoot Replacement
1Using side cutters, cut away and discard the boot clampsSlide the rear drive shaft out of the bearing carrier by pulling the bearing carrier assembly outward and tipping it down to remove the shaftRemove the large end of the boot from the CV joint and slide the boot down the shaftGrasp the rear drive shaft and pull sharply outward on the shaft to disengage it from the rear gearcasewhen removing to prevent