2011 Polaris Ranger RZR ATV Service Manual, Page 230Get this manual
CLUTCHING 11Clean end of taper on crankshaft and the taper bore inside drive clutch12Install drive clutch and torque retaining bolt to specification13Reinstall drive belt noting direction of belt rotation (see "DRIVE BELTBelt Installation")If new belt is installed, install so numbers can be easily read14Replace the outer clutch cover rubber gasket with the narrow side out15Reinstall outer clutch cover and secure with screwsTorque screws to specification
Clutch Offset Procedure
If the vehicle exhibits drive clutch drag or hard shifting while at idle speed, clutch offset adjustment is requiredWashers located behind the driven clutch on the transmission input shaft may need to be added or removed in order to obtain the proper offsetRefer to the "Clutch Offset Procedure" provided below1Follow steps 1-6 of the "PVT Disassembly" procedure