2011 Polaris Ranger RZR ATV Service Manual, Page 199Get this manual
BODYSTEERINGSUSPENSION REAR STABILIZER BAR (RZR)
RemovalInstallation
1Remove the exhaust pipe and exhaust silencer from the vehicle4Remove the stabilizer bar and bracket from the frame as an assembly
Remove Fasteners
Inspect the stabilizer bar for straightnessInspect the bushings and replace if neededInspect the rubber bushings on the linkage rod and replace if neededReverse the procedure for installationTorque the stabilizer bolts to 18 ftlbs(24 Nm)17 ftlbs(23 Nm)
NOTE: The exhaust silencer can be removed through the side of the vehicle after the exhaust pipe is detached from the header pipe2Remove the retaining nut from the upper portion of the stabilizer bar linkage bushing on each side of the vehicle