2011 Polaris Ranger RZR ATV Service Manual, Page 180Get this manual
BODYSTEERINGSUSPENSION 67Disconnect all electrical dash components noting their location and wire routingRemove the dash assembly from the vehicle54Remove the (3) Torx screws from the bottom side of the fender and the upper push rivet from the top sideRemove the fender from the vehicleRemove the (4) fasteners that retain the tie-down brackets to the cargo box and remove from vehicle
Front Fender Flair Removal 12If dash is installed, remove the (2) push rivets that attach the lower portion of the fender flair to the rocker panelsRemove the (6) push rivets (RZR) or (8) T27 Torx screws (RZR-SRZR-4) and remove fender flairs from the dash assemblyStandard RZR Shown
Cargo Box Assembly Removal
123Remove the seats and rear panel or cover (see "Seats", "Rear Service Panel" or "Rear Console Cover")Remove the (4) Torx screws retaining the lower portion of the rear bumper to the frame (see "Rear Bumper")Remove the (4) screws from the middle of the cargo box