2011 Polaris Ranger RZR ATV Service Manual, Page 164Get this manual
BODYSTEERINGSUSPENSION CAB FRAME (RZRRZR S)
AssemblyRemoval
NOTE: Finger tighten all components until cab frame is completely assembled on vehicle, then tighten to specifications listed12Assemble the rear cab frame and the front cab frame at the coupler joints and secure with four (38-16 14) screws and (38-16 Nyloc) nutsTighten screws to 25-28 ftlbs(34-38 Nm)Place the assembled cab frame onto the vehicle and align the rear mount holesFasten the rear cab frame brackets to vehicle with four (516-18) bolts and (516-18) nutsTighten bolts to 16-18 ftlbs(22-24 Nm)Fasten the two self-tapping screws to the rear inner portion of the bracket on each sideTighten screws to 15 ftlbs(20 Nm)Place the straps from the safety net over the front coupler postsFasten the front of the cab frame to the base brackets and secure with four (38-16 14) screws and (38-16 Nyloc) nutsTighten screws to 25-28 ftlbs(34-38 Nm)Attach side bars to cab frame using M6 screws and nuts on top and M8 screws and nuts on the bottomTighten to 8-10 ftlbs(10.8-13.5 Nm)To remove the cab frame, reverse the assembly procedure (steps 1-5)