2011 Polaris Ranger RZR ATV Service Manual, Page 125Get this manual
ELECTRONIC FUEL INJECTION 4If the resistance is correct- Test the main harness circuit between the sensor connector terminals and the corresponding pin terminals at the ECU (see wiring diagram)- Check the sensor mounting, air gap, flywheel ring gear for damage or runout, and flywheel keyFollow the "CPS Replacement" procedure to inspect CPS and flywheel ring gear for damageIf the resistance is incorrect, follow the "CPS Replacement" procedure5Remove the bottom bolt that attaches the bracket to the rear gearcase through the hole in the frame support as shown
Transmission Mounting Bolts
CPS Replacement
Removal 1Safely support the rear of the vehicle off the ground and remove the left-hand rear tireRear Gearcase Mounting Bolt 6Remove the (2) remaining fasteners that attach the bracket to the side of the rear gearcase