2011 Polaris Ranger RZR ATV Service Manual, Page 108Get this manual
ENGINE 8Install breather reed (G) into rocker cover (H)Lightly apply black RTV sealant to the outer edges of the breather reedThe reed has tab and will assemble one-way onlyTorque the breather bolts to specification20 inlbs(2.5 .55 Nm) 11Install thermostat (J), new O-ring, and thermostat housingTorque to specificationK 17 ftlbs(23 Nm)
L 120 inlbs(13.5 Nm)
84 inlbs(9.5 0.9 Nm)
Breather Bolt Toque: 20 inlbs(2.5 0.55 Nm) NOTE: When applying RTV, do not get any RTV inside the reed assembly9Place new seal (I) into the bottom of the coverBe sure the seal is seated into the cover properly