2011 Polaris Ranger RZR ATV Service Manual, Page 89Get this manual
ENGINE 2Remove the nut (C), washer (D) and water pump impeller (E)Remove part of the water pump seal behind the impeller5Remove the starter bendix (G), wire holddown plate (H), and the woodruff key (I) from the crankshaftThe stator does not have to be removed at this point
34Remove flywheel nut and washer6
Install Flywheel Puller (PN 2871043) and remove flywheel (F)
Remove the gearstator housing bolts and remove the gear stator housing cover (J) and gasket from the crankcaseBe sure to catch the excess oil from the crankcase