2011 Polaris Ranger RZR ATV Service Manual, Page 66Get this manual
ENGINE Engine Removal
Because of its design configuration and fastener torque requirements, Polaris recommends removing the engine, transmission and rear gearcase as one assemblyUse the following procedure when engine removal is requiredIMPORTANT: Some engine repair procedures can be performed without removing the engine assembly from the vehicleRefer to "Accessible Engine Components" on Page 3.15 for further informationNOTE: The use of an overhead or portable engine hoist is the only recommended method for removing and installing the enginetransmissionrear gearcase assemblyNOTE: Have an assistant help guide the engine in and out of the vehicle while using an engine hoist to prevent personal injury or damage to vehicle components8Remove the (2) screws from the rear of the center console (RZRRZR only)Remove the rear seat base assembly from the vehicle: RZRRZR S: Remove the (2) fasteners from the rear seat base (as shown above) RZR 4: Remove the (2) fasteners and seat latch plunger (A)Slide the rear seat base to the left and remove it