2011 Polaris Ranger RZR ATV Service Manual, Page 24Get this manual
MAINTENANCE GENERAL VEHICLE INSPECTION AND MAINTENANCE
Pre-RideDaily Inspection
Perform the following pre-ride inspection daily, and when servicing the vehicle at each scheduled maintenance Tirescheck condition and pressures Fuel tankfill to proper level All brakescheck operation and adjustment Throttlecheck for free operation and closing HeadlightsTaillightsBrakeli htsalso check operation of all indicator lights and switches Ignition switchcheck for proper function Wheelscheck for tightnessof wheel nuts and axle nuts; check to be sure axle nuts are secured by cotter pins Air cleaner elementcheckfor dirt; clean or replace Steeringcheck for free op eration noting any unusual looseness in any area Loose partsvisually inspect vehicle for any damaged or loose nuts, bolts or fasteners Engine coolantcheck for pr per level at the recovery bottle Check all front and rearsuspension components for wear or damage43If adjustment is required, loosen the lower jam nut and pull the cable out of the mount to move the upper jam nutUpper Jam Nut 2Shift Cable Dust Boot 1Locate the shift cable in the rear LH wheel well areaClevis Pin Shift Cable Mount