2010 Polaris Sportsman 850 Service Manual, Page 327Get this manual
ELECTRICAL Instrument Cluster Pinouts
IGNITION SWITCH
Function Test
Use multimeter to test for continuity between the sets of ignition switch outputs (OFFONSTART)If any of the tests fail, replace ignition switch assembly
Ignition Switch Test
A NOTE: Some functions not found on all modelsOFF ON START Turn the ignition key to ONThere should be continuity between pins and D; and FTurn the ignition key to STARTThere should be continuity between pins and B; and DB F
Instrument Cluster Pinouts
FUNCTION Battery Voltage (Vdc) Ground RunStop Switch CAN High CAN Low High Beam Input Fuel Level Sensor International Models Only Hazard Warning Left Turn Signal Right Turn Signal 10 21 22 PIN 20 23
Function Test (INT'L)