2010 Polaris Sportsman 850 Service Manual, Page 297Get this manual
STEERINGSUSPENSION Linkage RemovalInstallation
1Remove the upper linkage bushing from each sideUsing an 516" open-end wrench, hold the linkage rod and remove the lower linkage bushingLinkage 3Remove the (2) fasteners from each stabilizer bar bracket retaining the stabilizer bar to the frame
Remove Hold with 516" wrench 42Rotate the stabilizer bar up and remove the stabilizer linkage from the lower A-armRepeat this procedure if removing or replacing the other linkageReverse this procedure to reinstall the stabilizer linkageRefer to the "Exploded View" on the previous page for torque valuesRemove the upper shock mounting fastener from the right rear shock and swing the shock out from the frame
Stabilizer Bar RemovalInstallation