2010 Polaris Sportsman 850 Service Manual, Page 277Get this manual
STEERINGSUSPENSION Installation
1Locate the alignment pin on the bottom side of the upper blockThe pin should line up with the alignment hole in the lower block and should face the front
STEERING (NON-EPS MODELS)
Steering Post Removal
12Remove the front rack and front cover (see Chapter 9)Remove the upper and lower headlight pods from the handlebar bracket (see Chapter 9)
IMPORTANT: Take note of all vent line, wire harness and throttle cable routing for reassembly purposes3Remove the (4) fasteners retaining the handlebar bracket and block to the steering post
423Position the handlebar properly and install the (4) boltsEvenly tighten the pin side (front) bolts firstTorque the (2) front bolts to specification
Carefully remove the handlebar assembly from the steering post and place it on the front cab