2010 Polaris Sportsman 850 Service Manual, Page 261Get this manual
FINAL DRIVE 10Install the rear upper shock through-boltsTorque bolts to specification16Install the outer PVT cover, lower left-hand frame support and the left rear wheelRefer to Chapter "DRIVE BELTBelt Installation (XP Models)"17Install the rear wheels and torque wheel nuts to specification (see Page 8.2)18Add Polaris ATV Angle Drive Fluid to rear gearcase (see Chapter 2)Torque drain and fill plugs to specification
Rear Upper Shock Bolts: 37 ftlbs(50 Nm) 11Install the rear stabilizer bar onto the linkage rodsTorque the linkage retaining nuts to specification=Rear Gearcase Capacity: 7.1 floz(210 ml) or to bottom of fill plug hole threads See Chapter "Maintenance"
Stabilizer Bar Linkage Retaining Nuts: 17 ftlbs(23 Nm) 12Install the propshaft coupler onto the rear gearcase pinion shaft splinesInstall the lock washer and retaining nutNOTE: Orientate the lock washer as shown with the tooth surfaces contacting the nut and couplerNut Cam Surface Tooth Surface Coupler