2010 Polaris Sportsman 850 Service Manual, Page 237Get this manual
FINAL DRIVE 34Mount the reservoir to the frame using the previously removed screw(s)Install the vent line and the (4) bolts that secure the front gearcase to frameTorque bolts to specification7Install the LH and RH front gearcase brackets and the (2) bolts that retain themFinger tighten only until the lower steering post assembly is installed
Install Vent Line
36 ftlbs(49 Nm)
Install the (2) bolts securing the lower steering post assembly to the gearcase and torque all (4) bolts to specification
Front Gearcase Mounting Bolts: 36 ftlbs(49 Nm) 5Connect and route the AWD wire harness along the frame and install plastic tie strap to attach it to the frame