2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 300Get this manual
ELECTRICAL Method 12With the ignition key in the OFF position, press and hold the MODE buttonWhile still pressing the MODE button, turn the ignition key to the ON positionContinue holding the MODE button until the time begins to flashFollow stepsin METHOD to set the clock4The first number is located in the information area and can be to digits in lengthThis number equates to the suspected area of faultUnits of Measurement
The second number will appear in the clock area and can to digits in lengthThis number equates to the fault mode
To change between Standard and Metric units of measurement, follow these steps: 123Toggle the MODE button until the vehicle speed is displayed on the screenToggle the SELECT button until the odometer is displayed in the information areaPress and hold the MODE button until the units of measurement in the speedometer area change (MPH to km or kmh to MPH)Release the button when the desired setting is achievedAll units including vehicle speed, odometer trip meters, and clock will be set to the desired Standard or Metric units67Use the trouble code reference table in the EFI Chapter for description of each codePress and hold the MODE button to cycle through all currently active codesDiagnostic Mode