2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 265Get this manual
STEERINGSUSPENSION 5Install the (4) mounting fasteners and torque fasteners to specificationRefer to "Steering Exploded View (EPS Models)"Reconnect the (2) electrical harnesses to the power steering unit11Install the fuel tank assembly, fuel line and reconnect the fuel pump harness (see Chapter 3)12Reinstall the upper steering post bushing bracket and torque the (2) fasteners to specificationThe 8-way connector, two rows of four pins, does not have channeled lock on both sides, allowing it to be installed 180 from its intended positionThe connector will not positively engage or snap into place while in the wrong position, but can still be installedIf the connector is not installed correctly, the Power Steering Unit will not function7Align the mark on the upper steering post with the skip tooth spline on the upper power steering shaft upon installation (see Figure 10-1)Apply anti-seize to the shaft splines to aid assemblyPosition the upper steering post on the shaft so the pinch bolt is aligned with the recess in the power steering shaftPinch Bolt Shaft Recess