2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 253Get this manual
BODYFRAME HEADLIGHT POD
DisassemblyRemoval
1Remove the (5) Torx-headed screws retaining the upper and lower headlight pods
AssemblyInstallation
1Reverse the "DisassemblyRemoval" procedure
NOTE: Make sure to route all vent lines, wire harness and throttle cable correctly into the lower headlight pod234When installing the headlight into the lower pod, be sure to install the O-rings prior to installing the headlightPlace the headlight into the lower pod mounting tabs and press firmly until the headlight snaps into placeLift the O-ring up and over the headlight mounting tab to secure itAdjuster