2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 208Get this manual
FINAL DRIVE Installation
12Install the drive shaft axle through the backside of the bearing carrierInstall the upper and lower ball joint ends into the bearing carrierInstall the pinch bolts and torque to specification5Install the brake caliper and torque the new mounting bolts to specification
Front Caliper Mounting Bolts: 37 ftlbs(50 Nm)
New bolts have pre-applied locking agent which is destroyed upon removalAlways use new brake caliper mounting bolts upon assembly6Install the steering tie rod end onto the front bearing carrierTorque fastener to specification and install new cotter pin