2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 178Get this manual
CLUTCHING (PVT) Disassembly
Some fasteners and procedures will varyRefer to the appropriate parts manual for proper fastener placement12Remove the left rear wheel and lower left-hand frame support (see "DRIVE BELTBelt Removal", steps 1-4)Remove the (10) push rivets and (4) Torx-headed screws retaining the rear cab assembly67Mark the drive belt direction of rotation and remove drive belt (see "DRIVE BELTBelt Removal", steps 8-10)Loosen the clamps and remove the PVT outlet duct from the inner PVT coverRotate and remove the PVT outlet duct from the vehicle to allow for driven clutch removalRemove the tail light bulbs from the tail lamps, disconnect the tail light harnesses from the rear cab, and remove the rear cab to allow access to the PVT system for disassemblyRemove the (11) screws retaining the outer PVT cover9