2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 116Get this manual
ENGINE 24Remove the (2) through-bolt fasteners retaining the LH engine isolator mount to the engine and remove the lower nut from the mountPry up between the frame and isolator mount and remove the mount assembly from the frameTorque bolts to: 18 ftlbs(24 Nm)
27Remove the (2) screws retaining the IAC mount plate to the frame at the front of the engine28Disconnect the wire harness from the IAC and TPS located on the throttle bodyRemove the throttle body and IAC mount plate as an assembly with the throttle cable still attached to the throttle body
Pry Up HERE
Torque nut to: 36 ftlbs(49 Nm)